2 CAM POWER FREERIDE SAIL
The powerful early planing sail with great end speed and easy control in the limit range - the Exceed makes the pulse of the dedicated freerider beat faster. Two cambers charge the profile powerfully even in the lower wind range and stabilise the sail over its entire wind range, so that you can push the throttle for hours without tiring.
KEY FACTS:
> 2 Cam Freeride early planing sail
> Offset Clew, inner eyelet for more control and handling, outer eyelet for more low wind performance
> Excellent centre of effort stability and speed
> 6 Battens / 5 Tubes Cross Batten Concept for maximum control
> Moderate mast sleeve width for easy waterstart and rigging
> RDM compatible up to 7.0 sqm, RDM Camber Set necessary
Beginners in the world of camber sails will be thrilled. The Exceed excels with its unparalleled light construction, the two roll cams are simply flipped on the mast without effort. The outstandingly soft rotation in the jibe will convince even the last doubters - you have probably the most uncomplicated sail in this class in your hands.
The sizes 6.0 to 7.0 sqm can also be used with an RDM after modification with an appropriate camber set. This gives the sail a slightly softer feel with even more handling. MD X-Ply in the foot and large square-ply in the top as well as Kevlar lines in the construction are quality features for durability and guarantee the same sail structure and handling characteristics in the long term.
Whether you are a sporty freerider or a comfort-oriented slalom pilot, with the Exceed you have a stress-free planing machine in your hands whose supercharged performance keeps the competitors at a distance.
TECH SPECS
| Size m² |
Boom* cm |
Luff cm |
Battens/ Tubes |
Cam | Top | IMCS | Best Mast | Mast cm / Ø |
Price € |
| 6.0 | 190/198 | 436 | 6/5 | 2 | fix | 20-22 | Cross/Expert/Select | 430 SDM/RDM** | 519,- 449,- |
| 6.5 | 194/203 | 445 | 6/5 | 2 | fix | 20-22 | Cross/Expert/Select | 430 SDM/RDM** | 529,- 469,- |
| 7.0 | 196/204 | 454 | 6/5 | 2 | fix | 20-22 | Cross/Expert/Select | 430 SDM/RDM** | 539,- 489,- |
| 7.5 | 204/212 | 470 | 6/5 | 2 | fix | 24-26 | Cross/Expert/Select | 460 SDM | 569,- 515,- |
| 8.0 | 206/215 | 487 | 6/5 | 2 | fix | 24-26 | Cross/Expert/Select | 460 SDM | 579,- 525,- |
| 8.5 | 218/225 | 498 | 6/5 | 2 | fix | 28-30 | Cross/Expert/Select | 490 SDM | 589,- 539,- |
| 9.5 | 227/235 | 519 | 6/5 | 2 | fix | 28-30 | Cross/Expert/Select | 490 SDM | 599,- 549,- |
*Lower eyelet / Upper eyelet
**When using RDM mast, RDM Camber Set is necessary
SAIL TECH
INTELLIGENT MATERIAL ASSEMBLY
The well-designed combination of different materials allows weight savings without losing stability. By varying the stretch behaviour of the individual materials, we can precisely define each sail profile under pressure and guarantee you consistent sail characteristics over the long term.
X-PLY
The all-time classic of the reinforced laminates. X-Ply does withstand higher punctual stress. In case of a cut, the threads avoid further damage. X-Ply is light, stable and has a good transparency. Therefore, it is used in the window area of the Wave- and Cross Over Sails.
MULTI DIRECTIONAL X-PLY
Multidirectional X-Ply is used in high stress areas. The thread layout shows a higher density of polyester yarn, thus making the material more resistant than the regular X-Ply. The additional vertical thread direction allows the material to take more tension and force in the critical tension line.
SQUARE PLY
The Square-Ply is based on the same concept as X-Ply material. However, the threads are aligned in a 90 degree angle and the material offers a higher overall thread density. That allows us to reduce the thickness of the included monofilm to save weight, but ensure durability at the same time.
KEVLAR STRETCH CONTROL
The targeted use of Kevlar Warp laminate allows us to precisely determine the stretch characteristics of each sail, ensuring a consistent sail profile and more response. The extremely light, unidirectional Kevlar threads have a very low stretch, even under highest loads. They are specifically positioned in each sail depending on its area of use. With Kevlar Stretch Control you will permanently find consistent characteristics and performance in your sail.
DOUBLE LOCK SEAMS
Double seams form the most stable connection between individual panels and different materials. They are used in stress zones as well as in areas of high tension and make your sail robust and durable.
SYMMETRICAL BATTEN SYSTEM
The alternating arrangement of the sail battens on the front and back of the sail allows a balanced tension and weight ratio. With this feature you have the same sail feeling, no matter which direction you are driving.
CROSS BATTEN CONCEPT
Often used in flatwater sails with a big surface in the boom area. The longest batten of the sail starts under the boom and ends above the clew. In this area the deepest profile as well as the largest surface of the sail is located. The Cross Batten stabilizes this area, especially when pumping. The center of effort point remains stable.
SAIL FEATURES
SMART CLEW CONSTRUCTION
The Smart Clew Construction is based on the specific and precise alignment of different materials. The result is an extremely durable clew area without additional weight. The Clew Construction setup, which varies depending on the type of sail, defines the direction in which tension and force are transmitted from the clew to the sail, thus supporting the stability of the profile.
OFFSET CLEW
The wave sails are equipped with two clew eyelets which are set asymmetrically for individual tuning. > Upper eyelet for more power > Lower eyelet for more control
REDUCED BOOM LENGHT
For wave and cross over sails as well as for the freeride sail Stream, a concave cut is used from the batten above the boom to the clew, reducing the distance from the mast to the clew.
On the more performance-orientated flatwater sails, the RBL cut is made directly on the batten above the clew and the eyelet is shifted inwards by up to 12 cm.
POCKET GUARD
After rolling up the sail, simply attach the bungee rope and the sail can be stowed away easier and more space-saving.
STRAP ON
After rolling up the sail, simply attach the bungee rope and the sail can be stowed away easier and more space-saving.
FOOT GUARD
All seams in the significantly stressed foot area are protected by Dacron coverings. A PVC edging at the sail foot protects the leech edge against your board’s nonslip coating.
F.R.E.D.
Fast Rigging Easy Doing F.R.E.D. will help you to find the optimal downhaul trim for your sail. The mark is found in the upper sail window. Simply trim the downhaul rope until the loose leech reaches the FRED mark.
TOP GUARD
The large reinforcement at the sail top avoids abrasion and wearing out whilst rigging.
VARIO TOP
With some sails a Vario Top is used, which also allows the use of a longer mast. An additional loop is sewn on top of each sail. It serves to hook in the sail if you want to pull out the mast.
MINI BATTENS
Lightweight mini battens take control of the leech while twisting and avoid detrimental leech flutter. By that, the window fabrics are prevented from damage and the longevity of the sail is increased.
BATTEN GUARD
PVC logo labels on the batten pockets prevent wearing out and abrasion whilst rigging.
INTERNAL TRIM BATTEN
The Internal Trim Batten system is completely integrated into the batten pocket. The battens can stay tensioned in the sail. The fine adjustment ensures an optimal trim. The profiled end piece offers additional protection against abrasion. An Allen key to tension comes with each sail.
BOOM POSITION CONTROL
The printed height scale at the boom opening helps you to easily remember your personal boom position.
SLEEVE VOLUMER
The sewn PVC label keeps the mast sleeve open at the boom opening like a clasp making it easier to insert the mast.
MAST FOOT PROTECTOR
The mast foot protector can be pulled back whilst rigging. The webbing strap eases the initial pulling down of the sail. The uphaul can be comfortably inserted through an opening in the protector
MESH POCKET
The uphaul rope can be comfortably inserted through an opening in the protector.
COMFORT PULLEY
The integrated triple pulley has large easy turning stainless brass rolls which greatly reduce the effort required for sail trimming.
TRIM SETTING
The luff length is patched on the mast protector. The boom length is also printed beside the clew.
▶TEST REPORTS
WIND SPÉCIAL TEST 2021 | EXCEED 7.5 2021
GALLERY
▶
GUNSAILS COPYRIGHT © 2022 | ALL RIGHTS RESERVED | GUNSAILS.COM